Name: PESU-E2010 25KG
Price: 1045000 KRW
Availability: InStock

PESU-E2010 25KG

1,045,000원

BASF ULTRASON

(41,800원 / Kg)

간편결제 가능

구매평

Q&A

구매하기 장바구니 0

간편결제 가능

장바구니 장바구니

구매하기 구매하기

구매평

Q&A

Mechanical properties	dry / cond	Unit	Test Standard
Tensile modulus	- / 2640	MPa	ISO 527-1/-2
Yield stress	- / 86	MPa	ISO 527-1/-2
Yield strain	- / 6.9	%	ISO 527-1/-2
Tensile creep modulus, 1h	* / 2800	MPa	ISO 899-1
Charpy impact strength, +23°C	- / N	kJ/m²	ISO 179/1eU
Charpy impact strength, -30°C	- / N	kJ/m²	ISO 179/1eU
Charpy notched impact strength, +23°C	- / 7.5	kJ/m²	ISO 179/1eA
Charpy notched impact strength, -30°C	* / 8	kJ/m²	ISO 179/1eA

Thermal properties	dry / cond	Unit	Test Standard
Glass transition temperature, 10°C/min	225 / *	°C	ISO 11357-1/-2
Temp. of deflection under load, 1.80 MPa	205 / *	°C	ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa	218 / *	°C	ISO 75-1/-2
Vicat softening temperature, 50°C/h 50N	215 / *	°C	ISO 306
Coeff. of linear therm. expansion, parallel	52 / *	E-6/K	ISO 11359-1/-2
Burning behavior at 1.5 mm nominal thickness	V-0 / *	class	IEC 60695-11-10
Thickness tested (1.5)	1.6 / *	mm	IEC 60695-11-10
Yellow Card available	Yes / *	-	-
Burning behavior at thickness h	V-0 / *	class	IEC 60695-11-10
Thickness tested (h)	3.0 / *	mm	IEC 60695-11-10
Yellow Card available	Yes / *	-	-
Burning behavior 5V at thickness h	5VA / *	class	IEC 60695-11-20
Thickness tested	3.0 / *	mm	IEC 60695-11-20
Yellow Card available	Yes / *	-	-
Oxygen index	38 / *	%	ISO 4589-1/-2

Material specific properties	dry / cond	Unit	Test Standard
Viscosity number	56 / *	cm³/g	ISO 307, 1157, 1628

Rheological calculation properties	Value	Unit	Test Standard
Density of melt	1230	kg/m³	-
Thermal conductivity of melt	0.18	W/(m K)	-
Spec. heat capacity melt	1950	J/(kg K)	-
Eff. thermal diffusivity	7.53E-8	m²/s	-
Ejection temperature	200	°C	-

Test specimen production	Value	Unit	Test Standard
Injection molding, melt temperature	360	°C	ISO 294
Injection molding, mold temperature	160	°C	ISO 294
Injection molding, injection velocity	200	mm/s	ISO 294
Injection molding, pressure at hold	70	MPa	ISO 294