OctudOCTUDBASFOfficial Ultrason® distributor
KOEN
Request a Quote
PRODUCTSSulfone PolymersPEEKHigh-Temperature Colorants
SERVICESParts supply
PESU · Polyethersulfone

Ultrason® E 1010

저점도·고유동 PESU 사출 그레이드. MVR 150 cm³/10 min의 뛰어난 유동성으로 박육 부품과 복잡한 형상을 낮은 사출압으로 충전하며, 203°C 열변형온도를 유지합니다.

저점도 · 고유동박육 성형UL94 V-0 (3 mm)HDT/A 203°C투명 (Transparent)
TECHNICAL DOCUMENTS

Download the official documents for Ultrason® E 1010.

Stocked in Korea (standing inventory) · Evaluation samples available · engineering reply within 24 hours

Supply information

Stock and lead time confirmed at the time of enquiry

Ultrason® E 1010 is a PESU · Polyethersulfone grade supplied in Korea by Octud Co., Ltd. Stocked in Korea (standing inventory); minimum order 25 kg; evaluation samples available.

Korean stock
Stocked in Korea (standing inventory)
Lead time
Ex-stock: 1–2 days nationwide · indent lead time on request
Minimum order (MOQ)
25 kg
Equivalency review
On request

Typical property data

Tested at 23°C / 50% RH, dry as moulded. Source: BASF Ultrason® E 1010 TDS.

General PropertiesGeneral Properties
PROPERTYMETHODUNITVALUE
DensityISO 1183g/cm³1.37
Density
ISO 1183 · g/cm³
1.37
Viscosity NumberISO 307cm³/g48
Viscosity Number
ISO 307 · cm³/g
48
Melt Volume Flow Rate MVR (360°C/10 kg)ISO 1133cm³/10 min150
Melt Volume Flow Rate MVR (360°C/10 kg)
ISO 1133 · cm³/10 min
150
Water Absorption (수중 포화, 23°C)ISO 62%2.2
Water Absorption (수중 포화, 23°C)
ISO 62 · %
2.2
(23°C/50% r.h.)ISO 62%0.8
(23°C/50% r.h.)
ISO 62 · %
0.8
Moulding Shrinkage (평행 방향)ISO 294-4%0.79
Moulding Shrinkage (평행 방향)
ISO 294-4 · %
0.79
(2 mm)DIN 5036-3%88
(2 mm)
DIN 5036-3 · %
88
(1 mm)ISO 489—1.650
(1 mm)
ISO 489 · —
1.650
Mechanical PropertiesMechanical Properties
PROPERTYMETHODUNITVALUE
Tensile ModulusISO 527-1/-2MPa2,650
Tensile Modulus
ISO 527-1/-2 · MPa
2,650
Stress at Yield, 50 mm/minISO 527-1/-2MPa85
Stress at Yield, 50 mm/min
ISO 527-1/-2 · MPa
85
Strain at YieldISO 527-1/-2%6.8
Strain at Yield
ISO 527-1/-2 · %
6.8
Charpy Notched Impact Strength (23°C)ISO 179/1eAkJ/m²6.5
Charpy Notched Impact Strength (23°C)
ISO 179/1eA · kJ/m²
6.5
Charpy Unnotched Impact Strength (23°C)ISO 179/1eUkJ/m²Non-break
Charpy Unnotched Impact Strength (23°C)
ISO 179/1eU · kJ/m²
Non-break
(23°C)ISO 180/AkJ/m²6.5
(23°C)
ISO 180/A · kJ/m²
6.5
Ball Indentation Hardness (358 N/30 s)ISO 2039-1MPa154
Ball Indentation Hardness (358 N/30 s)
ISO 2039-1 · MPa
154
Thermal PropertiesThermal Properties
PROPERTYMETHODUNITVALUE
DSC, 10°C/minISO 11357-1/-2°C222
DSC, 10°C/min
ISO 11357-1/-2 · °C
222
Heat Deflection Temperature HDT/A (1.8 MPa)ISO 75-1/-2°C203
Heat Deflection Temperature HDT/A (1.8 MPa)
ISO 75-1/-2 · °C
203
(단기)—°C220
(단기)
— · °C
220
RTI, 20,000 hIEC 60216°C180
RTI, 20,000 h
IEC 60216 · °C
180
Coefficient of Linear Thermal Expansion CLTE (23–80°C, 평행)ISO 11359-1/-2E-6/K52
Coefficient of Linear Thermal Expansion CLTE (23–80°C, 평행)
ISO 11359-1/-2 · E-6/K
52
Flammability Rating (1.5 mm)UL 94classV-1
Flammability Rating (1.5 mm)
UL 94 · class
V-1
Flammability Rating (3 mm)UL 94classV-0
Flammability Rating (3 mm)
UL 94 · class
V-0
Electrical PropertiesElectrical Properties
PROPERTYMETHODUNITVALUE
Relative Permittivity, 1 MHzIEC 62631-2-1—3.8
Relative Permittivity, 1 MHz
IEC 62631-2-1 · —
3.8
Dissipation Factor, 1 MHzIEC 62631-2-1E-4140
Dissipation Factor, 1 MHz
IEC 62631-2-1 · E-4
140
Volume ResistivityIEC 62631-3-1Ω·m> 1E13
Volume Resistivity
IEC 62631-3-1 · Ω·m
> 1E13
Surface ResistivityIEC 62631-3-2Ω> 1E15
Surface Resistivity
IEC 62631-3-2 · Ω
> 1E15
Electric StrengthIEC 60243-1kV/mm37
Electric Strength
IEC 60243-1 · kV/mm
37
test liquid AIEC 60112—125
test liquid A
IEC 60112 · —
125

※ Values are typical, not specification limits. Verify against the current TDS during design validation.

RELATED READING

Related reading

All news & insights →
New products23 October 2026

BASF extends Ultrason® into AI data-centre and e-mobility electrical & electronic parts

BASF is extending its polyarylethersulfone family Ultrason® (PSU, PESU, PPSU) into electrical and electronic parts for AI data centres, high-speed connectivity and e-mobility — fibre-optic connectors, cable jacketing, magnet-wire insulation and thermal-management parts. What was announced, and what connector and electrical-component makers in Korea should check.

Technical notes23 September 2026

PPSU vs PA baby bottles: heat, impact, sterilisation and safety margin on the datasheets

PPSU is the super-engineering plastic used in hospital instruments steam-sterilised thousands of times at 134°C and in aircraft cabin interiors. We set its datasheet against the transparent PA also used in baby bottles, on identical test methods, and explain in plain terms what the 'margin' left above boiling water is and why it matters.

We'll help you find the right grade

Ask us for a TDS, pricing or a sample.

Request a Quote →FAQ