High-Performance Sulfone Polymers (PSU, PESU, PPSU)

BASF Ultrason® S 2010 is the equivalent standard-viscosity transparent PSU injection molding grade, matching on tensile strength, HDT and other key properties. Octud supplies it from Korean stock and provides evaluation samples.

BASF Ultrason® P 3010 is the equivalent PPSU grade, delivering the same non-break notched impact toughness and resistance to over 1,000 repeated steam sterilization cycles.

All three are amorphous sulfone polymers — transparent with excellent hydrolysis resistance. PSU offers the best cost-performance balance, PESU the family's highest glass transition (Tg 225°C) and stiffness, and PPSU the greatest impact toughness and repeated steam sterilization durability.

Yes. Where a part must stay transparent but needs far greater heat, hydrolysis and chemical resistance than PC can offer, sulfone polymers are the standard replacement.

Yes. Octud is the official distributor and holds BASF Ultrason® injection and extrusion grades across the S, E and P series in Korean stock — in-stock material ships and arrives anywhere in Korea within 1–2 days; non-stock grades are quoted with lead time. Tell us the application, service temperature and quantity and we reply with quotation and TDS within 24 hours.

Yes. Octud does not run its own molding machines, but we deliver part projects together with partner molders experienced in sulfone resins. Send the drawing, quantity and requirements (food contact, sterilization, electrical insulation, etc.) — we review grade selection and processing conditions first, obtain the partner molder's quotation and quote you per molded part. If you already have a molder, we support with material, colorant and processing data only.

Yes. Octud is an official Avient Colorant Chromatics™ distributor and supplies sulfone-specific masterbatch (colour concentrate) with minimal colour shift at high processing temperatures, matched to RAL or Pantone references. Both transparent tints and opaque colours are possible on PSU, PESU and PPSU; let-down ratios are confirmed after colour-sample approval.