Ultrason® E 2010 G6
30% glass-fibre reinforced PESU injection molding grade. A 222°C heat deflection temperature and 9,800 MPa tensile modulus make it the choice for high-temperature structural parts and metal-replacement designs.
Download the official documents for Ultrason® E 2010 G6.
Supply information
Stock and lead time confirmed at the time of enquiryUltrason® E 2010 G6 is a PESU · GF30 grade supplied in Korea by Octud Co., Ltd. Stocked in Korea (standing inventory); minimum order 25 kg; evaluation samples available.
Typical property data
Tested at 23°C / 50% RH, dry as moulded. Source: BASF Ultrason® E 2010 G6 TDS.
※ Values are typical, not specification limits. Verify against the current TDS during design validation.
Related reading
BASF extends Ultrason® into AI data-centre and e-mobility electrical & electronic parts
BASF is extending its polyarylethersulfone family Ultrason® (PSU, PESU, PPSU) into electrical and electronic parts for AI data centres, high-speed connectivity and e-mobility — fibre-optic connectors, cable jacketing, magnet-wire insulation and thermal-management parts. What was announced, and what connector and electrical-component makers in Korea should check.
PPSU vs PA baby bottles: heat, impact, sterilisation and safety margin on the datasheets
PPSU is the super-engineering plastic used in hospital instruments steam-sterilised thousands of times at 134°C and in aircraft cabin interiors. We set its datasheet against the transparent PA also used in baby bottles, on identical test methods, and explain in plain terms what the 'margin' left above boiling water is and why it matters.