OctudOCTUDBASFOfficial Ultrason® distributor
KOEN
Request a Quote
PRODUCTSSulfone PolymersPEEKHigh-Temperature Colorants
SERVICESParts supply
PSU · Polysulfone

Ultrason® S 6010

분자량 62,000 g/mol의 초고점도 폴리설폰(PSU) 그레이드. 사출 등급 중 가장 높은 인성과 내화학성을 제공해 두꺼운 부품, 압출 형상, 반복 응력을 받는 구조 부품에 적합합니다.

초고점도 · Mw 62,000최고 인성내화학성 개선투명 (Transparent)압출 가능
TECHNICAL DOCUMENTS

Download the official documents for Ultrason® S 6010.

Stocked in Korea (standing inventory) · Evaluation samples available · engineering reply within 24 hours

Supply information

Stock and lead time confirmed at the time of enquiry

Ultrason® S 6010 is a PSU · Polysulfone grade supplied in Korea by Octud Co., Ltd. Stocked in Korea (standing inventory); minimum order 25 kg; evaluation samples available.

Korean stock
Stocked in Korea (standing inventory)
Lead time
Ex-stock: 1–2 days nationwide · indent lead time on request
Minimum order (MOQ)
25 kg
Equivalency review
On request

Typical property data

Tested at 23°C / 50% RH, dry as moulded. Source: BASF Ultrason® S 6010 TDS.

General PropertiesGeneral Properties
PROPERTYMETHODUNITVALUE
DensityISO 1183g/cm³1.23
Density
ISO 1183 · g/cm³
1.23
Viscosity NumberISO 307cm³/g81
Viscosity Number
ISO 307 · cm³/g
81
Melt Volume Flow Rate MVR (360°C/10 kg)ISO 1133cm³/10 min30
Melt Volume Flow Rate MVR (360°C/10 kg)
ISO 1133 · cm³/10 min
30
Water Absorption (수중 포화, 23°C)ISO 62%0.8
Water Absorption (수중 포화, 23°C)
ISO 62 · %
0.8
(23°C/50% r.h.)ISO 62%0.3
(23°C/50% r.h.)
ISO 62 · %
0.3
Moulding Shrinkage (평행 방향)ISO 294-4%0.72
Moulding Shrinkage (평행 방향)
ISO 294-4 · %
0.72
(2 mm)DIN 5036-3%87
(2 mm)
DIN 5036-3 · %
87
Molecular WeightMolecular Weight
PROPERTYMETHODUNITVALUE
Mw (GPC in THF, PS 표준)GPCg/mol62,000
Mw (GPC in THF, PS 표준)
GPC · g/mol
62,000
Mw/MnGPC—3.9
Mw/Mn
GPC · —
3.9
Mechanical PropertiesMechanical Properties
PROPERTYMETHODUNITVALUE
Tensile ModulusISO 527-1/-2MPa2,560
Tensile Modulus
ISO 527-1/-2 · MPa
2,560
Stress at Yield, 50 mm/minISO 527-1/-2MPa74
Stress at Yield, 50 mm/min
ISO 527-1/-2 · MPa
74
Strain at YieldISO 527-1/-2%5.7
Strain at Yield
ISO 527-1/-2 · %
5.7
Charpy Notched Impact Strength (23°C)ISO 179/1eAkJ/m²6
Charpy Notched Impact Strength (23°C)
ISO 179/1eA · kJ/m²
6
Charpy Notched Impact Strength (−30°C)ISO 179/1eAkJ/m²6.5
Charpy Notched Impact Strength (−30°C)
ISO 179/1eA · kJ/m²
6.5
Charpy Unnotched Impact Strength (23°C)ISO 179/1eUkJ/m²Non-break
Charpy Unnotched Impact Strength (23°C)
ISO 179/1eU · kJ/m²
Non-break
Ball Indentation Hardness (358 N/30 s)ISO 2039-1MPa135
Ball Indentation Hardness (358 N/30 s)
ISO 2039-1 · MPa
135
Thermal PropertiesThermal Properties
PROPERTYMETHODUNITVALUE
DSC, 10°C/minISO 11357-1/-2°C187
DSC, 10°C/min
ISO 11357-1/-2 · °C
187
Heat Deflection Temperature HDT/A (1.8 MPa)ISO 75-1/-2°C177
Heat Deflection Temperature HDT/A (1.8 MPa)
ISO 75-1/-2 · °C
177
Coefficient of Linear Thermal Expansion CLTE (23–80°C, 평행)ISO 11359-1/-2E-6/K53
Coefficient of Linear Thermal Expansion CLTE (23–80°C, 평행)
ISO 11359-1/-2 · E-6/K
53
Coefficient of Linear Thermal Expansion CLTE (140°C, 평행)DIN 53752E-6/K60
Coefficient of Linear Thermal Expansion CLTE (140°C, 평행)
DIN 53752 · E-6/K
60
Electrical PropertiesElectrical Properties
PROPERTYMETHODUNITVALUE
Relative Permittivity, 1 MHzIEC 62631-2-1—3.4
Relative Permittivity, 1 MHz
IEC 62631-2-1 · —
3.4
Dissipation Factor, 1 MHzIEC 62631-2-1E-471
Dissipation Factor, 1 MHz
IEC 62631-2-1 · E-4
71
Volume ResistivityIEC 62631-3-1Ω·m> 1E13
Volume Resistivity
IEC 62631-3-1 · Ω·m
> 1E13
Surface ResistivityIEC 62631-3-2Ω> 1E15
Surface Resistivity
IEC 62631-3-2 · Ω
> 1E15
Electric StrengthIEC 60243-1kV/mm37
Electric Strength
IEC 60243-1 · kV/mm
37
test liquid AIEC 60112—125
test liquid A
IEC 60112 · —
125

※ Values are typical, not specification limits. Verify against the current TDS during design validation.

GRADE EQUIVALENCYPSU · 폴리설폰 switching guideProperty comparison, approval checkpoints and the switching procedure, family by family.View switching guide →
RELATED READING

Related reading

All news & insights →
New products23 October 2026

BASF extends Ultrason® into AI data-centre and e-mobility electrical & electronic parts

BASF is extending its polyarylethersulfone family Ultrason® (PSU, PESU, PPSU) into electrical and electronic parts for AI data centres, high-speed connectivity and e-mobility — fibre-optic connectors, cable jacketing, magnet-wire insulation and thermal-management parts. What was announced, and what connector and electrical-component makers in Korea should check.

Technical notes23 September 2026

PPSU vs PA baby bottles: heat, impact, sterilisation and safety margin on the datasheets

PPSU is the super-engineering plastic used in hospital instruments steam-sterilised thousands of times at 134°C and in aircraft cabin interiors. We set its datasheet against the transparent PA also used in baby bottles, on identical test methods, and explain in plain terms what the 'margin' left above boiling water is and why it matters.

We'll help you find the right grade

Ask us for a TDS, pricing or a sample.

Request a Quote →FAQ